RIVET NUT HEXAGON ZINC PLATED M10X20MM (1,0-4,0MM) (100PCS)

This blind rivet nut is equipped with a cartel edge on the outside for more grip, the blind rivet nut can be placed in a pre-drilled hole, the blindmoer also has grooves on the shaft and under the head that grasp the material and prevent the nut from running. The blind rivet nut is suitable for creating a wire bush / nut at a place where a nut normally is placed behind the bolt, but there is no opportunity for that, so the back is blind. The blind klink nuts are applied with a special blind rivet tongs such as article ALM tong. This blind rivet nut has a size of M10x20mm and a wire range of 1.0-4.0 mm