XTREME JOINT SEALANT/SMOOTHER (1PC)

Ironing seam kit: • Color: light gray • Skin formation: 3 - 4 min. (In 250c) • Drying time: 24 hours. (In 25 ° C, thickness 1 mm) • Spitness: after completely dry (24 hours) • Workable temperature: 15 ÷ 350C Properties VOC = 360 [G / L]. This product complies with the requirements of the European Union Directive (2004/42 / WE), which for this product category (b / 5) the limit value of the content of volatile substances at the level of 840 [g / l]. Quick drying product designed for sealing seams, joints and welds in the parts from the car body. A flexible seal for excellent water protection, moisture, dirt and dust. After curing, it does not tear and creates a smooth layer that can be painted with all paint systems. Can be applied by nylon brush or putty knife. Basic: Synthetic rubber and resins. Appearance: Thixotrope pasta. Specific gravity: 1.20 ± 0.02 g / cm3. As a result of many paint and varnishes on the market, the compatibility test is recommended. Drying time depends on the air temperature, humidity and thickness of the layer. User manual The surfaces to be treated must be clean, dry, rust, dust and grease-free. It is recommended to treat surfaces with suitable primer. The product must be applied to the desired thickness. The layered layer must be untouched to fully dry. That is why further training is not necessary. Note: For safety reasons, you must always meet the information provided in the safety data sheet for the relevant product. Date of Production: See Tube MSDS Sheet: www.sinatec.com Scary Xtreme Seam Sealant FR Xtreme Mastic a la brosse The Xtreme History Dichtungsmasse NL XTREME IRIZATED SEADS KIT / IRIRD KIT